Accessories & Services
See how Philtec fiber optic sensors solve measurement challenges in aerospace, energy, cryogenics, medical technology, vacuum systems, high-pressure environments, and advanced research applications.
| Code | Feature | Downloads | |
|---|---|---|---|
| Sensor Calibrations: Sensors in the field can be returned to the factory for a gap calibration in air. Sensors can also be calibrated while submerged in a fluid sample provided by the customer. | |||
| cal-A | Sensor calibrations in air | ||
| cal-F | Sensor calibrations in fluid | ||
| cal-AN | NIST Traceable Sensor Calibrations In Air | ||
| cal-FN | NIST Traceable Sensor Calibrations In Fluid | ||
| CM32940 | Ø5 x 2 mm Calibration Check Mirror. A calibration check mirror is provided along with a Certificate of Calibration which specifies the accuracy of a single point sensor reading. | ||
| Compression Fittings: Stainless Steel fittings with nylon compression ferrules can be used to hold sensor tips having 1/8" or 3/16" diameter tips. Overall length is 1.4". They can be bulkhead mounted into a 0.4" deep straight threaded hole. | |||
 CF125 | For 1/8" tip diameter sensors such as D63, D64, D100, RC100. Requires 5/16-24 threaded hole. | ||
| CF187 | For 3/16" tip diameter sensors such as D169 - D171, RC171. Requires 3/8-24 threaded hole. | ||
| CF312 | For 5/16" tip diameter sensors such as RC89, RC90, RC140, RC190. Requires 1/2-20 threaded hole. | ||
| Mirrored Target Discs: Type 316 stainless steel 0.8 mm (.032") thick with #8 mirror polish. When bonded to a target, these specimens present a smooth mirrored surface to optimize sensor performance. | |||
 M25 | Ø 6.35 mm (1/4") Disc | ||
 M50 | Ø12.7 mm (1/2") Disc | ||
| Retro-Reflective Tape | |||
 RT1 | 100 mm square. Use Retro-Reflective Tape To Enhance Sensor Performance. | ||
| Probe Mounting Blocks: Aluminum block for use with probes having a Ø 1/4" or Ø 3/16" collars. The block can be mounted on a linear stage to provide a fine active adjustment of the sensor-to-target gap. | |||
 B25 | For any model with Ø1/4" collared probes. | 2D Drawing | 3D CAD |
| B31 | For any model with Ø5/16" collared probes. | 2D Drawing | 3D CAD |
| Micro-Stages: These manual linear stages provide a fine adjustment (80 TPI). | |||
 56416 | Single Axis Stage, 0.18" Travel for use with Model B25 Block. | ||
| 56422 | Single Axis Stage, 0.50" Travel for use with Model B31 Block | ||
| mini-DMS Y-Cable Power Adaptors | |||
 PS-1 | Required for operaton of any mini-DMS sensor. Includes AC/DC power supply and Y adaptor cable with D-sub female 9 pin (standard RS-232 connector) and 2.1 mm coax male power connector. | ||
 PS-10 | Enables single channel operation of any rack mountable mcDMS sensor (without using the 10DMS rack). Includes AC/DC power supply and Y adaptor cable with D-sub female 9 pin (standard RS-232 connector) and 2.1 mm coax male power connector. | ||
| PS-U | Universal power supply for mini-DMS sensors (power supply only). | ||
| Option Q Power Supply | |||
 PS-Q | Provides a 12 VDC, 500 ma AC/DC power supply terminated with Philtec's 3 Pin Weathertight Option Q Connector. | ||
| USB To Serial RS-232 Adaptor Cable | |||
 ADB9 | A 500 Kbps High Speed Adaptor with 6 inch long cable, 9-pin Serial Male to USB Type A Male, USB 1.1 Compliant, Works with USB 1.1 & 2.0 ports. Requires Windows 98 SE, ME, 2000, XP, Vista, Windows 7 | ||
| mini "B" to "A" USB Locking Connector | |||
 AUSB | A 2 cm long, robust dust and waterproof connection, fully shielded providing good levels of noise immunity and EMI protection. For use with muDMS sensors. | ||